[過去ﾛｸﾞ] OpenBSDユーザーコーナー Part5 (1001ﾚｽ)
上下前次1-新

---

このｽﾚｯﾄﾞは過去ﾛｸﾞ倉庫に格納されています｡
次ｽﾚ検索 歴削→次ｽﾚ 栞削→次ｽﾚ 過去ﾛｸﾞﾒﾆｭｰ

---

643: 2006/11/05(日)18:02 AA×


[240|320|480|600|100%|JPG|べ|ﾚｽ栞|ﾚｽ消]
643: [] 2006/11/05(日) 18:02:56 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xfd860/0x7a0 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0xc000 0xd8000/0x4000! 0xdc000/0x4000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x11: rng active, 8Kb/sec vga1 at pci0 dev 2 function 0 "Intel 82815 Graphics" rev 0x11: aperture at 0xf8000000, size 0x4000000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x03 pci1 at ppb0 bus 1 "TI TSB43AA22 FireWire" rev 0x02 at pci1 dev 0 function 0 not configured cbb0 at pci1 dev 2 function 0 "Ricoh 5C475 CardBus" rev 0x80pci_intr_map: no mapping for pin A : couldn't map interrupt fxp0 at pci1 dev 8 function 0 "Intel 82562" rev 0x03, i82562: irq 9, address 08:00:46:17:d6:6a inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x03: SpeedStep pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to com patibility http://mevius.5ch.net/test/read.cgi/unix/1134532407/643

---

上下前次1-新書関写板覧索設栞歴

---

あと 358 ﾚｽあります
ｽﾚ情報 赤ﾚｽ抽出 画像ﾚｽ抽出 歴の未読ｽﾚ AAｻﾑﾈｲﾙ

---

ぬこの手 ぬこTOP 0.043s